深度自编码观测器飞机操纵面快速故障诊断

为了避免扩展多模型自适应估计故障诊断方法中的雅克比矩阵计算,解决飞机精确模型难以获得的问题,降低在线故障诊断的计算量,提出了一种基于深度自编码观测器的飞机操纵面快速故障诊断方法.基于离线训练、在线估计的思想,采用量测的飞行数据训练得到不同故障下的飞机模型,代替扩展多模型自适应估计方法的卡尔曼滤波器进行状态估计;基于基础自编码器的隐层节点数选取经验公式,推导了两种深度自编码器的隐层节点数选取的递推公式.仿真结果表明,该方法无需精确的飞机模型,故障诊断速度快、精度高.     

Simultaneous state and actuator fault estimation for satellite attitude control systems

In this paper, a new nonlinear augmented observer is proposed and applied to satellite attitude control systems. The observer can estimate system state and actuator fault simultaneously. It can enhance the performances of rapidly-varying faults estimation. Only original system matrices are adopted in the parameter design. The considered faults can be unbounded, and the proposed augmented observer can estimate a large class of faults. Systems without disturbances and the fault whose finite times derivatives are zero piecewise are initially considered, followed by a discussion of a general situation where the system is subject to disturbances and the finite times derivatives of the faults are not null but bounded. For the considered nonlinear system, convergence conditions of the observer are provided and the stability analysis is performed using Lyapunov direct method. Then a feasible algorithm is explored to compute the observer parameters using linear matrix inequalities (LMIs). Finally, the effectiveness of the proposed approach is illustrated by considering an example of a closed-loop satellite attitude control system. The simulation results show satisfactory perfor-mance in estimating states and actuator faults. It also shows that multiple faults can be estimated successfully.     

某型装备轴承件无失效时的可靠性参数估计

针对寿命服从威布尔分布的某型装备轴承件在无失效数据时的可靠性参数估计问题,首先,以失效概率为待估参数,取其先验分布为Beta分布,在2个超参数的先验密度函数为2种不同情形下,建立了失效概率的2种EBayes估计模型,分析了稳健性、渐近性和单调性;然后,对威布尔分布参数进行了加权最小二乘估计,进而建立了可靠度的2种E-Bayes估计模型,分析了稳健性和单调性;最后,结合实例数据进行了可靠性参数估计与分析,指出第2种估计模型更加合理有效。     

Vision-based pose estimation for cooperative space objects

Imaging sensors are widely used in aerospace recently. In this paper, a vision-based approach for estimating the pose of cooperative space objects is proposed. We learn generative model for each space object based on homeomorphic manifold analysis. Conceptual manifold is used to represent pose variation of captured images of the object in visual space, and nonlinear functions mapping between conceptual manifold representation and visual inputs are learned. Given such learned model, we estimate the pose of a new image by minimizing a reconstruction error via a traversal procedure along the conceptual manifold. Experimental results on the simulated image dataset show that our approach is effective for 1D and 2D pose estimation.     

复合材料加筋壁板制造成本的快速估算模型

为了能够在设计阶段早期对复合材料加筋壁板制造成本进行快速估算,提出了一种以结构设计重量为主要驱动因素的制造成本估算模型。该模型的关键是考虑了诸如材料成本比重系数、制造工艺系数、蒙皮形状系数、筋条形状系数、材料利用率系数等合理取值。以某验证试验的试验件制造成本估算为例,估算成本与实际制造成本的偏差为10.8%,说明了采用该方法对复合材料加筋壁板制造成本进行快速估算的结果是可以为设计人员提供决策依据的。     

对模态参数识别的整体正交多项式算法的评述

整体正交多项式识别算法利用整体最小二乘方法来辨识结构模态参数，识别精度一般高于普通意义上的正交多项式拟合算法，本文系统的介绍了整体正交多项式识别算法发展过程中出现的三种方法，同时从识别精度、对噪声敏感程度和识别效率三个方面对方法进行详细的比较和评价，并在此基础上进一步指出了方法存在的问题和未来的研究方向。     

基因方法在网格结点位置优化中的应用

将基因方法应用于网格结点位置的优化中。文中首先简单介绍了基因优化方法中基于达尔文进化论和Ｍｅｎｄｅｌ基因理论的基本原理，其中包括插索空间表达、三个基因作用器（选择、交配和变异）等要点；然后着重阐述了相关偏微分方程的离散误差和三角形网格几何形状的适应度函数的定义、结点位置的二进制基因表达及基因方法的优化进程。离散误差是在二次非连续彭鼓包（ｂｕｍｐ）函数的空间中近似定义的，并且在点移动过程中相关解的二     

根据两颗导航星信息估计捷联惯导系统误差的一种方法

针对高机动短时间飞行的飞行器,介绍了一种根据它相对2颗导航卫星的伪距离和伪速度信息,估计捷联惯导系统定位和定速度误差的方法.考虑到由确定飞行器相对每颗星的径向距离和速度的非线性方程施加的约束,根据这些误差矢量长度最小值的条件确定误差值.用空间解析几何法得出了计算捷联惯导系统误差估值的最终算法,这种算法能给出非线性最小值问题的精确解.     

A residual based adaptive unscented Kalman filter for fault recovery in attitude determination system of microsatellites

This paper presents an adaptive unscented Kalman filter (AUKF) to recover the satellite attitude in a fault detection and diagnosis (FDD) subsystem of microsatellites. The FDD subsystem includes a filter and an estimator with residual generators, hypothesis tests for fault detections and a reference logic table for fault isolations and fault recovery. The recovery process is based on the monitoring of mean and variance values of each attitude sensor behaviors from residual vectors. In the case of normal work, the residual vectors should be in the form of Gaussian white noise with zero mean and fixed variance. When the hypothesis tests for the residual vectors detect something unusual by comparing the mean and variance values with dynamic thresholds, the AUKF with real-time updated measurement noise covariance matrix will be used to recover the sensor faults. The scheme developed in this paper resolves the problem of the heavy and complex calculations during residual generations and therefore the delay in the isolation process is reduced. The numerical simulations for TSUBAME, a demonstration microsatellite of Tokyo Institute of Technology, are conducted and analyzed to demonstrate the working of the AUKF and FDD subsystem.     

基于纵向滤波的星敏感器低频误差在线估计

多敏感器数据融合是获得更高精度姿态测量的有效方法，敏感器数据融合前必须先修正低频误差。首先，介绍了星敏感器低频误差（LFE）的产生机理及对其在线估计的必要性。其次，针对传统算法的不足，提出了基于纵向滤波的低频误差在线估计算法，该算法将传统低频误差估计问题转化为若干个常值误差估计问题，提高了估计精度。最后，给出了该算法具体实施方式，说明相关参数物理意义及选取原则。通过理论分析及仿真，算法误差可忽略不计。通过在轨数据仿真，星敏感器轨道周期低频误差可被消除。